Mill roll stand,Hydraulic type , Auto splicer , Preheater roll / triple preheater roll

  Vacuum web guide , Overhead conveyor bridge

  Single facer     Double glue unit , Double facer with belt drive unit
  Rotary shear cutter , Automatic slitter scorer ,
     N.C. Cut off (Helical Knife) single cut off or double cutt off , Auto down stacker

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::   www.lmc.com.tw
   MODEL : RSC
Direct driven by AC inverter drivers on knife cylinder and anvil drum for order
change speed at 150 M/min. or 200 M/Min. depends on quote.
Machine offers for continuously cutting knife. Anvil drum O.D. 328.6mmf,
covered with standard polyurethane cover at 275 mm/width which is easy for
replacement after worn out.
In the end of sheet feed out with scraps removal deflector by air cylinder control.
Use serrated blade in helical angle for easy order changing.
Upper knife shaft use 15KW direct AC motor driven and inverter control. Lower
knife shaft use 2.2KW direct AC motor driven and inverter control.

::::::::::::::::::::::::::::::::::   www.lmc.com.tw
   MODEL : ASSD  ( Single Disc blade design )

 1. Max. speed (depends on corrugator line speed) :
150-350mpm.
 2. Min. distance between 2 scoring heads :
100mm.
 3. Min. distance between 2 slitting heads :
160mm.
 4. Setting accuracy :
1mm.
 5. Slitting knife diameter :
300mm.
 6. Scoring roller diameter :
250mm.
 7. Board line height :
1060mm.
 8. Lateral unit mov\vement :
100mm.
 9. Machine weight :
10000kgs approx.

Operator and drive side machine frame.
Upper and lower cross beams.
Upper and lower scorer rolls and shafts.
Upper slitting rollers and shafts.
Lower steel anvil for slitting knife.
Driving shafts for upper slitting rollers and upper scoring rollers.
Upper and lower scoring heads.
Upper slitting knife heads and lower steel anvil head for slitting knife.
Driving screw shafts for knife heads and scorer heads movement.
Main drive motor and lateral position movement motor.
Operaiton electrical panel and main computer control system.
Production Control Interface: Utilizing RS-422 industrial communication protocol.
Automatic grinding of slitting blades
User friendly interface easy to learn and use
With computer control system at 30,000 order memory capacity.

   MODEL : NCTS

Machine speed: 200M/min or 250M/min. depends on the speed curve chats as well
as the motor capacity quoted..
Main drive motor : AC servo motor from Italy with regen system controls from
Control Techniques/UK, Australia.
Use CTIU display as standard supply.
Use high presise grinded gear sets for high speed running and cutting. Cutting
accuracy +/-1mm at stable constant cutting speed.
Helical single piece knife with fully adjustable blade positioning for optimum tuning.
Cut length 550~4000mm (no over speeds) and maximum cutting board weight: 2000
gram/sq. m
Retractable no-crush belt and pull roll in-feed and out-feed system for easy access
and optimum sheet control with individual drive controls.
Options : Computer system with monitor and excel spread sheet software. Web
director unit for double cut off.

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::   www.lmc.com.tw
   MODEL : DSTK

 
Hydraulic unit control for stacking table up and down movement..
Use Hydraulic power unit with 20HP motor.
Pallet delivery conveyor x 1 unit.
Sheet shingle and delivery to the stacking table in four section of conveyor belts.
Full width belts with the same length to reduce the parts stock cost and for easy
maintenance.
Sheet stacking delivery out is controlled by AC inverter motor for smooth traveling.
Back stop position is motorized adjustment with digital display.
Interrupter bar for accurate stack count. High speed "Clean Out"for fast stack cycle.
"Concorde"nose design and variable stacking level for best sheet control.
Include side walks,ladders and safety rails.