Mill roll stand,Hydraulic type , Auto splicer , Preheater roll / triple preheater roll

  Vacuum web guide , Overhead conveyor bridge

  Single facer     Double glue unit , Double facer with belt drive unit
  Rotary shear cutter , Automatic slitter scorer ,
     N.C. Cut off (Helical Knife) single cut off or double cutt off , Auto down stacker

:::::::::::::::::::::::::::::::::::::::::::::::::::::::   www.lmc.com.tw
   MODEL : WUD-340  ( Fingerless / Vacuum type )
Vacuum hood design.
Pneumatic loading upper corrugator roll & pressure roll.
Corrugator roll diameter : 340mm (13.5”)
Roll out glue mechanism.
Independent glue roll drive.
“Lodding” type doctor blade.
Digital display of gaps.
Positive glue roll minmum gap stops with shims.
Gates GT belt (Kevlar)drive. Run with less vibration and producing better
board and urn quieter.
Preconditioner with motorized wrap roll.
Machine working widths 1600mm (63”) to 1800mm (70”).
Speeds to 200 mpm (650 fpm)
 

:::::::::::::::::::::::::::::::::::::::::::::::::::::::   www.lmc.com.tw
   MODEL : WTG-408  ( Fingerless / Vacuum type )
Vacuum hood design.
Pneumatic loading upper corrugator roll & pressure roll.
Corrugator roll diameter : 480mm(16”)
Roll out glue mechanism.
Independent glue roll drive.
“Lodding” type doctor blade.
Digital display of gaps.
Positive glue roll minmum gap stops with shims.
Gates GT belt (Kevlar)drive. Run with less vibration and producing
better board and urn quieter.
Preconditioner with motorized wrap roll.
Machine working widths 2000mm (80”)to 1800mm (98”).
 

:::::::::::::::::::::::::::::::::::::::::::::::::::::::   www.lmc.com.tw
   MODEL : PBSF-408  ( Quick roll change/ Pressure type )

MODELˇGPBSF
A
B
C
D
E
1600M/C
4515
3625
2730
1785
2550
1800M/C
4915
4025
2930
1985
2750
2000M/C
4915
4025
2930
1985
2750
2200M/C
5415
4525
3180
2235
3000
2500M/C
5415
4525
3180
2235
3000

GENERAL
Cartridge mounted corrugating roll for quick flute change.
Vacuum or pressure type.
Speed to 350mpm (1150fpm)
Main power AC motor with ac inverter for energy savings.
Direct Gates GT (Kevlar) belt drive.
Corrugating roll f 408mm (16”)
Rotary steam joint: heavy-duty rod supported joints fitted with siphon pipes.
Integral pre-conditioner and pre-heater with motorized wrap roll.
Pre-heating station for hot roll changes.
Steam shower.
Positive pressure roll and glue roll gap stops on corrugator roll cartridges.
Web break detector with automatic stop control.
Vacuum fan blower for lower noise.
Single facer width : from 1600 m (63”) to 2500mm (98”).
 
GLUE MECHANISM
Roll out glue mechanism.
Indepndent glue roll drive.
Engraved chrome plated glue roll.
Chrome plated glue roll.
Meter roll: chrome plated; maximum T.I.R. 0.01mm (0.0004”)
 
CONTROL
Separate control for electricity and hydraulics on control panel.
Hydraulic loading with motorized pressure roll gap adjustments.
Automatic idle of lower corrugating roll on stop.
Digital display of gaps.
Computer control with touch –screen monitor.